HWR

SOLIDBolt Grid Plate

MECHANICAL ZERO POINT TECHNOLOGY

SOLIDBolt is a new and unique zero-point clamping system. HWR has succeeded in making the zero-point technology even simpler and better with a new approach. In addition, SOLIDBolt is significantly less costly, more flexible to use, safer to clamp and compatible with every machine or fastening grid. The new HWR zero-point clamping technology SOLIDBolt is the basis for productive setup of your milling machine. Safe, flexible, precise and fast are the properties that were important to us during development.

Dimensions: 384 x 384 x 27mm
Weight: 28.9kg


Click Here to see the HWR SOLIDBolt System is capable of!

SOLIDChuck

3 Jaw Manual Chuck with SOLIDPoint 96 Connection

Application

* Suitable for SOLIDPoint 96, SOLIDBolt 96 and QuickPoint 96 from LANG
* Clamping with Hard or Soft Jaws
* Jaws can be used for internal and external clamping
* Easy to change over to SOLIDBolt by exchanging the zero-point studs
* Weight-reduced due to aluminium chuck body with wear-resistant, hard-coated surface
* Integrated interface for EcoCompact and EcoTower from LANG
* Compatible with LANG (P/No: 51160)

SOLIDChuck - Hard Jaw Set

Compatible with LANG (P/No: 51161)

Sold as a set

SOLIDChuck - Soft Jaw Set

Compatible with LANG (P/No: 51162)

Sold as a set

SOLIDPoint Centering Spigots

For the concentric alignment of your SOLIDPoint plates, we offer you the matching centering spigot.

All HWR plates have a 20H7 or 50H7 fitting hole on the underside and can thus be adapted to the most common bore diameters (30, 32 and 50mm) of your machine table.

INOFlex VF
Compensating Concentric 4 Jaw Vice

HWR has responded to the development of modern machine tools and developed the flexible INOFlex. INOFlex permits compensating centric clamping of round, rectangular and also geometrically unshaped parts through its patented compensation feature.

Application:

* Clamping of round, square, rectangular and irregular parts
* For deformation sensitive parts
* Stationary application on milling machines
* Internal and external clamping
* Direct mounting of SOLIDBolt and SOLIDPoint

Technical Features:

* Centric compensating clamping with 4 jaws
* Centric clamping with 2 jaws
* Clamping with fixed stop


Click Here to watch the INOFlex VF Video

SOLIDBolt Zero-Point Pullstud

Stud Diameter: 20mm

Sold Individually

SOLIDClean Chip Fan

The SOLIDClean cleaning propeller is used to clean the machine table. Chips, chip nest and coolant residues can be removed easily and efficiently. Whether after dry machining or machining with coolant, SOLIDClean reduces water and chip carry-over to a minimum. Especially indespensable for automated processes!

Application

* The SOLIDClean fan may be clamped in a 20mm standard collet or Weldon toolholder
* The SOLIDClean fan is stored just like a common tool in the tool magazine and selected automatically via CNC program
* Prior to the cleaning process, workpieces and fixtures can be cleaned with coolant using the spindle (no rotation of the spindle)

SOLIDGrip 5 Axis Centering Vice

125mm Jaw Width

Reduced tho the essentials, SOLIDGrip vices nevertheless offer a wide range of possible applications. Whether raw part clamping with stamping technology, clamping in smooth jaws or clamping of contour part - SOLIDGrip is the right solution.

Application:

* Suitable for SOLIDPoint 96, SOLIDBolt 96 and QuickPoint 96 from LANG
* Clamping with stamping technology or smooth surfaces
* Jaws can be used on both sides
* Easy to change over to SOLIDBolt by exchanging the zero-point studs


Click Here to see the HWR SOLIDGrip Vice Video

SOLIDGrip 125 Replacement Jaw Sets

125mm Jaw Width

Compatible with the following HWR SolidGrip 125 Vices:

683155-125
683205-125
683255-125
683305-125
683355-125
681155-125
681205-125
681255-125
681305-125
681355-125

Also compatible with the following LANG Makro-Grip 125 vices:

48122-125
48205-125
48255-125
48305-125
48355-125

SOLIDGrip 5 Axis Centering Vice

46mm Jaw Width

Reduced tho the essentials, SOLIDGrip vices nevertheless offer a wide range of possible applications. Whether raw part clamping with stamping technology, clamping in smooth jaws or clamping of contour part - SOLIDGrip is the right solution.

Application:

* Suitable for SOLIDPoint 52 and QuickPoint 52 from LANG
* Clamping with stamping technology or smooth surfaces
* Jaws can be used on both sides


Click Here to see the HWR SOLIDGrip Vice Video

SOLIDPoint Cover Plates for Mounting Holes

15mm Diameter P/No: 669015 > Compatible with LANG P/No: 45008-15
20mm Diameter P/No: 669020 > Compatible with LANG P/No: 45008-20
27mm Diameter P/No: 669027 > Compatible with LANG P/No: 45008-27

SOLIDPoint

Standard 52mm & 96mm Pullstuds

Compatible with QuickPoint from LANG

HWR 652052 > LANG 45270
HWR 662096 > LANG 45570

SOLIDStamp

Embossing device for introducing the positive fit

The embossing technique is a process in which a defined tooth contour is embossed into the workpiece in advance under high pressure for later clamping using positive locking. This work step takes place outside the clamping device. With SOLIDStamp from HWR you can create secure tension thanks to proven embossing technology. With the help of the stamping station, raw parts can be prepared for clamping in the vice in seconds. There is no need for complex pre-processing, such as milling clamping points and dovetails. A minimum clamping depth of 3mm and maximum holding forces are just some of the advantages of SOLIDStamp.

Positive Locking makes it possible!

The positive connection produced by the stamping station offers many advantages. Thanks to minimal clamping edge allowance of just 3mm, the customer is able to reduce their material costs. Furthermore, the highest chip volumes can be achieved, which in turn saves time for the customer and leads to cost reductions. The lower clamping pressure, which is sufficient due to the positive fit, leads to less deformation of the workpiece and leads to better manufacturing results. Due to the very good accessability on the workpiece, shorter tools can be used, which leads to greater process reliability and higher production quality. Thanks to the proven tooth contour consisting of a retaining tooth and a depth stop, components can also be reproducibly embossed and clamped in series. By using a center marking, the workpieces can be positioned precisely in the machine without any annoying work stops.

SOLIDPoint

Loose T Nuts (DIN6323)

To simplify the assembly and alignment of your SOLIDPoint plates we offer 20H7 alignment T Nuts for the matching grooves in your machine tool table.