PH HORN

PH Horn Threadmill Inserts - Type 306

Internal / Partial Profile

These inserts fit onto Type M306 Toolholders

Pitch - 0.5 ~ 3.0mm
Minimum Bore Size - 10.0 ~ 11.7mm

PH Horn S100 Series Integral Parting Toolholders

The PH Horn S100 series is a Universal / High Performance Parting Off system for nearly all materials.

Depth of Groove up to 32.5mm (65mm Diameter)
Width of Groove 3.0mm

Self Clamping

Note: P39L Wrench is not included with the blade purchase - must be ordered seperately

PH Horn S100 Series Parting Off Blades

The PH Horn S100 series is a Universal / High Performance Parting Off system for nearly all materials.

Depth of Groove up to 55mm
Width of Groove 2.0mm ~ 5.0mm

Note: P39L Wrench is not included with the blade purchase - must be ordered seperately

PH Horn S100 Series Inserts

The PH Horn S100 series is a Universal / High Performance Parting Off system for nearly all materials.

E Geometry = For Parting Off in almost every material
3V Geometry = For Parting Off in Stainless Steel - Good chip forming and chip control with very strong edge!
WA Geometry = For Parting Off in Aluminium

Available in Left Hand / Nuetral / Right Hand

Sold in packets of 2 pieces

For other grades, geometries and application advice please call us on 0800 639 991

PH Horn S100 Series Integral Parting Toolholders - Through Coolant

The PH Horn S100 series is a Universal / High Performance Parting Off system for nearly all materials.

Depth of Groove up to 32.5mm (65mm Diameter)
Width of Groove 3.0mm

Self Clamping

Note: P39L Wrench is not included with the blade purchase - must be ordered seperately

PH HORN Type SH117 Broaching Tools

For direct mounting in CNC lathes and milling machines as well as mounting in a live broaching attachment to machine keyways, splines, chamfers, hex and torx keys.

Application Tips:
1) It is important to use a machine with mechanical spindle lock ie: C Axis on CNC Lathe
2) The use of proper coolant is key to a good surface finish, long tool life as well as good chip evacuation
3) A relief groove or the possibility for a "ramp down" exit out of the cut is necessary at the end of the broached groove
4) Setting of the tool is very important, double check the component diameter before taking the first pass
5) The tool should be set at the 12 O'Clock position to ensure that chips fall away from the groove
6) Take an accurate measurement of the insert and program the dimension into the machine tool parameter
7) Position the tool at the start position of the first stroke and program a stop to perform a visual check to assure a collision free pass of the tool!

The same Form must be used for Holder and Insert ie: Form C Holders can only fit Form C Inserts.

PH HORN Type SH117 Broaching Tools

C11 Tolerance Inserts - TA45 Coated - For All Materials


Application Tips:
1) It is important to use a machine with mechanical spindle lock ie: C Axis on CNC Lathe
2) The use of proper coolant is key to a good surface finish, long tool life as well as good chip evacuation
3) A relief groove or the possibility for a "ramp down" exit out of the cut is necessary at the end of the broached groove
4) Setting of the tool is very important, double check the component diameter before taking the first pass
5) The tool should be set at the 12 O'Clock position to ensure that chips fall away from the groove
6) Take an accurate measurement of the insert and program the dimension into the machine tool parameter
7) Position the tool at the start position of the first stroke and program a stop to perform a visual check to assure a collision free pass of the tool!

The same Form must be used for Holder and Insert ie: Form C Holders can only fit Form C Inserts.

PH HORN Type SH117 Broaching Tools

P9 Tolerance Inserts - TA45 Coated - For All Materials


Application Tips:
1) It is important to use a machine with mechanical spindle lock ie: C Axis on CNC Lathe
2) The use of proper coolant is key to a good surface finish, long tool life as well as good chip evacuation
3) A relief groove or the possibility for a "ramp down" exit out of the cut is necessary at the end of the broached groove
4) Setting of the tool is very important, double check the component diameter before taking the first pass
5) The tool should be set at the 12 O'Clock position to ensure that chips fall away from the groove
6) Take an accurate measurement of the insert and program the dimension into the machine tool parameter
7) Position the tool at the start position of the first stroke and program a stop to perform a visual check to assure a collision free pass of the tool!

The same Form must be used for Holder and Insert ie: Form C Holders can only fit Form C Inserts.

PH Horn Threadmill Shanks - Type M306

Material = Carbide for good vibration resistance

Through Coolant

For Type 108, 306 & 606 Inserts
(Minimum Bore Diameter = 9.6mm)

PH Horn Threadmill Inserts - Type 306

Internal / Full Profile

These inserts fit onto Type M306 Toolholders

TPI - 11 ~ 19
Minimum Bore Size - 9.7 ~ 11.7mm